Lindemann DPM

Lindemann DPM increases the lubricating properties of oil and is fully compatible with all engine oils, which is in line with international CC, CD and CF specifications. DPM can be used for filters with filter pores of 5 microns or larger. The excellent lubricating properties of DPM help to improve and certainly retain the lubricating properties of the engine oil.

Description

This post is also available in: German French Italian Spanish

Lindemann DPM

Regular use of Lindemann Diesel Performance Marine provides the greatest protection and minimum wear for diesel engines. DPM has been specifically developed for auxiliary 2- and 4-stroke engines and high-speed main engines. DPM contains small microscopic particles of Teflon (PTFE), which have a very low friction. The combination of specially treated Teflon particles and other anti-wear, anti-friction and anti-oxidation additives in DPM ensures lower fuel consumption, higher performance and minimal wear – even at high speeds and high loads.

Lindemann DPM increases the lubricating properties of oil and is fully compatible with all engine oils, which is in line with international CC, CD and CF specifications. DPM can be used for filters with filter pores of 5 microns or larger. The excellent lubricating properties of DPM help to improve and certainly retain the lubricating properties of the engine oil.

Regular use of DPM reduces the amount of wear particles (metal) in the oil. DPM lubricates and protects the engine at temperatures well above what normal oil can withstand, which is especially important for turbocharged engines.

Benefits

  • Can be used at temperatures from -30 ° C to +250 ° C
  • Less leakage and oil consumption
  • Less mechanical noises
  • Less friction and wear on cold starts
  • Lower maintenance costs
  • Corrosion and rust protection
  • More power
  • Increased cylinder pressure
  • Reduced fuel consumption and oil temperature

Dosage and use
1 liter of DPM is good for 32 liters of engine oil. Replace oil and oil filters and let the engine run until it is warm, then turn the engine off. Shake the DPM bottle well and add the additive to the oil. The engine must then be restarted and run for at least 15 minutes. New or completely refitted engines must run for 50 hours before they can be treated with DPM.

Availabilty
1/5/10 liter