Lindemann HYD-SL

HYD-SL is suitable for all hydraulic systems. HYD-1 and HYD-SL are the result of long-term scientific research into lubrication and protection of hydraulic systems. Investigations have revealed that reducing wear and leaks in these systems is imperative for safety reasons. In many ways, normal hydraulic oils are regular base oils, which do not have the same load capacity as HYD additives.

Description

Lindemann HYD-SL

HYD-SL is suitable for all hydraulic systems. HYD-1 and HYD-SL are the result of long-term scientific research into lubrication and protection of hydraulic systems. Investigations have revealed that reducing wear and leaks in these systems is imperative for safety reasons. In many ways, normal hydraulic oils are regular base oils, which do not have the same load capacity as HYD additives.

HYD-1 and HYD-SL consist of microscopic Teflon (PTFE) and anti-wear, anti-foam, anti-oxidation and anti-corrosion additives. All of these components are mixed with high performance carrier oil, which is consistent with the robust Abex Dennison HFO / HF2 performance specifications and with the Sperry Vickers “Hydraulic Vane Pump” wear test.

The additive brings synthetic rubber gaskets back to their original flexibility to restore their original function. (HYD-SL NOT HYD-1)

HYD-SL additives are recommended in combination with a sealant additive and a wear additive in case of leakage.

Benefits

  • Boiling point / range (° C.):> 300 ° C • Flash point: 100 ° C
  • Shelf life: Min. 10 years under the right conditions
  • Less noise and heat
  • Less wear on the pump and control valve
  • Less wear on seals
  • Prevents leaks in the future (HYD-1)
  • Seals / reduces leaks (HYD-SL)
  • Lower maintenance costs
  • Compatible with mineral, synthetic and most types of biodegradable oil

Dosage and use
1 liter of HYD-1 is sufficient for 100 liters of hydraulic oil. HYD-1 is suitable for use with oil filters over 5 microns. Shake well before use! Treatment with HYD can be carried out at any time after an oil change or if the system is topped up after leakage. After addition, the system must be used thoroughly to ensure complete circulation of HYD-SL.

WARNING!!! LINDEMANN HYD MUST NOT BE USED IN HYDRAULIC BRAKING SYSTEMS WITH VEGETABLE OIL!

Availability
1/5/10 liter