Lindemann Radiator & Block Stop Leak

Description

This post is also available in:

Lindemann Radiator Stop Leak

Lindemann Radiator & Block Stop Leak has been specially developed to quickly and efficiently repair leaks in the cooling system. This additive can be added to all modern cooling systems, also in combination with any type of antifreeze.

In case of a contaminated cooling system, it is recommended to first clean the cooling system with Lindemann Radiator & Block Flush. As a result, Lindemann Radiator & Block Stop Leak will work optimally!

Properties

• Eliminates leaks in the cooling system
• Prevents corrosion
• Extends the life of the system

Dosage and use
When Lindemann Radiator & Block Stop Leak is used, the engine cooling system should be at operating temperature so that the thermostat is fully open. In addition, make sure that the fan of the stove is running at full speed.

Pay attention! The cooling system is pressurized and the cooling water can boil, causing serious burns. Therefore, be extremely careful when loosening the radiator cap. Heat-resistant clothing should be worn to prevent possible burns.

Then shake the bottle well and add the contents to the cooling system and let the engine run for a minimum of 10 minutes at increased idle speed (approximately 1500 rpm).

1 Bottle of Lindemann Radiator & Block Stop Leak is good for 6 liters of coolant and can be mixed with all types of antifreeze.