Lindemann TA Manual Gearbox & Differential Treatment

Lindemann TA Manual Gearbox & Differential Treatment based on Teflon (PTFE) provides maximum lubrication and anti-wear protection for gears and bearings in all types of gearboxes (helical, track and worm drive). TA combines a balanced mix of Teflon (PTFE) with other extreme pressure and corrosion inhibitors.

Description

Lindemann TA Manual Gearbox & Differential Treatment

Lindemann TA Manual Gearbox & Differential Treatment based on Teflon (PTFE) provides maximum lubrication and anti-wear protection for gears and bearings in all types of gearboxes (helical, track and worm drive). TA combines a balanced mix of Teflon (PTFE) with other extreme pressure and corrosion inhibitors.

Lindemann TA Manual Gearbox is suitable for use with all synchro mesh rings and differentials. Many modern gearboxes suffer from poor gear when the gearbox is cold. As a result, a number of manufacturers recommend a lighter grade of oil, and in some cases automatic transmission fluid. These lighter quality oils provide superior gear transmission at the expense of shorter gear and bearing life, as the lower viscosity oil does not have the degree of EP (Extreme Pressure) protection. Due to the EP characteristics, Lindemann TA will greatly improve the protection gear changes.

The Teflon particles in Lindemann TA Manual Gearbox & Differential Treatment range from 4 to 40 microns. The smaller particles are subjected to high pressures and temperatures, impregnating the friction surfaces, reducing friction, providing residual lubrication and corrosion resistance.

The larger Teflon particles circulate with the normal gear lubricant and create a film layer between the gear surfaces, significantly reducing friction between the gears. This damping effect is important because it reduces the noise caused by small irregularities of surfaces responsible for the very common “period noise” in differentials.

Benefits

  • Less friction and wear
  • Quieter operation of the gearbox
  • Shift smoother
  • Less oil leakage
  • Improved protection against extreme pressure
  • Corrosion resistant
  • Extends the life of the gearbox

Dosage and use
Add the required amount of Lindemann TA to the gearbox / differential. 1 liter of TA is sufficient for 4 liters of oil. Repeat the application with every oil change. Pay attention! Do not use Lindemann TA in automatic transmissions! Use the Lindemann AUT for this.

Availability
300 ml and 1 liter.